U880-Softwaremonitor Version 3.1 - Press RETURN
>

U8000-Softwaremonitor Version 3.1 - Press NMI
 O U
BOOTING FROM UDOS FLOPPY
> boot



Boot
: ud(0,0)sa.format

>>>  Format Hard-Disk 4.1  <<<
Firmwareversion 'WDC_4.2'
Number of Drives: 1  (Drive 0)
Error on RESET
Error in PAR&BTT on Drive 0 (PAR not ok) (BTT not ok)

List of Drive-Parameters:
|No.|  Name      |  cyls; hds; secs; prae; ramp;
-----------------------------------------------
| 1 |NEC D5126   |  615; 4; 18; 128; 12;
| 2 |NEC D5146   |  615; 8; 18; 128; 12;
| 3 |ROBOTRON VS |  820; 6; 18; 820; 1;
| 4 |ROB K5504.50|  1024; 5; 18; 1024; 1;
-----------------------------------------------
Which Typ ? (No./n/q) n
PAR --- Drivetype: '            '
PAR --- Cylinders: 100  Heads: 2  Sectors: 18  Praecomp: 100  Ramp: 1
Parameter for Drive ok ? (y/l/p/q)p
Parameters: b(Drivetype(ASCII))
            c(Number of Cylinders)  h(Number of Heads)
            s(Number of Sectors)    p(Begin Cylinder of Praecompensation)
            r(Distance of Cylinders for Ramp Mode)
            e (End of Input)   q (Jump to the End of 'sa.format')
Parameter: (b/c/h/s/p/r)value,e,q ST1100
Parameter: (b/c/h/s/p/r)value,e,q c1072
Parameter: (b/c/h/s/p/r)value,e,q h8
Parameter: (b/c/h/s/p/r)value,e,q s18
Parameter: (b/c/h/s/p/r)value,e,q p1072
Parameter: (b/c/h/s/p/r)value,e,q r1
Parameter: (b/c/h/s/p/r)value,e,q e
PAR --- Drivetype: 'ST1100      '
PAR --- Cylinders: 1072  Heads: 8  Sectors: 18  Praecomp: 1072  Ramp: 1
Parameter for Drive ok ? (y/l/p/q)y
  No Entries in Bad Track Table (BTT) of Drive 0

Manual Input of bad Track of Drive 0 (y/n/q) ? n

  Format Begin: Cylinder (a/Start-Cylinder) a
Ready for Format Drive 0 from Cyl 0 Hd 0
                           to Cyl 1071 Hd 7 ? (y/n/q) y
      New Entry in BTT: Cyl 21  Hd 1
      New Entry in BTT: Cyl 27  Hd 3
      New Entry in BTT: Cyl 77  Hd 6
      New Entry in BTT: Cyl 185  Hd 6
      New Entry in BTT: Cyl 603  Hd 4
      New Entry in BTT: Cyl 713  Hd 6
      New Entry in BTT: Cyl 787  Hd 4
      Format Cyl 1071  Hd 7
PAR --- Drivetype: 'ST1100      '
PAR --- Cylinders: 1072  Heads: 8  Sectors: 18  Praecomp: 1072  Ramp: 1

  7 Entries in Bad Track Table of Drive 0:
    Cyl 21 Hd 1
    Cyl 27 Hd 3
    Cyl 77 Hd 6
    Cyl 185 Hd 6
    Cyl 603 Hd 4
    Cyl 713 Hd 6
    Cyl 787 Hd 4
Rewrite PAR&BTT from WDC-RAM to HD-Drive 0 ? (y/n)y

End of 'sa.format' (y/n) ? y
Exit called



Boot
: ud(0,0)sa.verify

>>>  Verify Hard-Disk 4.1  <<<

Firmwareversion 'WDC_4.2'
PAR --- Drivetype: 'ST1100      '
PAR --- Cylinders: 1072  Heads: 8  Sectors: 18  Praecomp: 1072  Ramp: 1
  Number of Drives: 1 (Drive 0)  Blocks/Drive: 154224


  7 Entries in BTT of Drive 0
    Cyl 21 Hd 1
    Cyl 27 Hd 3
    Cyl 77 Hd 6
    Cyl 185 Hd 6
    Cyl 603 Hd 4
    Cyl 713 Hd 6
    Cyl 787 Hd 4

useful Blocks of Drive 0: 154098

Verify Begin: Cylinder 0
Verify   End: Cylinder 1071
Verify complete      
End of 'sa.verify' ? (y/n)y
Exit called